Horizontal Wall Beds Guide
Ribbonic -Single Size/ Double Size (Vertical / Horizontal) Murphy Bed Fitting Hardware
- Total 12 Parts of this Fittings.
- 2 Piece Black Powder Coated Piston Attachment (L & R)
- 2 Piece L Shape Bracket (L & R)
- 2 Piece Folding Bracket Leg
- 2 Piece Heavy Duty Hydraulic Gas Pump
- 2 Piece Hydraulic and Fittings
- 2 piece Magnet bed Frame Support
- hydraulic Load Capacity 150kg / 200kg / 300kg
- installation Chart
- measurement chart
- Total Fittings Wight 5kg
WALL BED PANEL
The wall bed panel is the main portion of the Murphy horizontal wall bed, so please assemble it very carefully and safely. We have to assemble the wall bed panel using screws and 18mm thick sheets of plywood. During forming the boundary of the top and bottom sides of the panel, ensure that all the sheets fit perfectly. Leave spaces of approximately 2 inches on the left and the right side of the panel. Attach the supplied attachable parts at the bottom of the panel using screws and leave 3 inches of space as mentioned in the measuring chart.
BEHIND THE WALL BED BOX VIEW
The image here displays the actual behind the box product. Notice where and how the hydraulics are placed and attached. Start with attaching the small hydraulics. The upper screw of the hydraulic should be a 2-inch wall side cross from the lower screw of the hydraulic. To attach the larger hydraulic repeat the same process similar to the small hydraulic.
Please ensure that this entire process is performed when the wall bed panel of your horizontal Murphy wall bed is closed.